Driver®Control
Ethernet контролен блок вход / изход.
- Устройство за контрол на натоварването (осветление, променлив ток и др.).
- Включва 4 релейни изхода и 2 цифрови входа.
- Съвместим с биометрични устройства.
- Може да управлява до две свързани единици за четене.
- Лесен монтаж за всички видове конструкции.
PRODUCT OVERVIEW
Driver®Control
DriverControl® е мрежов контролер за връзка между жичните биометрични устройства на Biodit и софтуера за управление на Biodit.
DriverControl® може да работи с до 2 биометрични устройства за управление на едностранно една врата или две врати. Разполага с 4 програмируеми релета и 2 програмируеми цифрови входа. DriverControl® може също така да контролира електронни брави, автоматични врати, бариери за паркиране, турникети. Чрез устройството може да се управляват електрически уреди като осветление, климатизация, вентилационни системи и асансьори.
Комуникацията с други контролери и специализиран софтуер се осъществява чрез вградената Ethernet мрежова карта, свързана към съществуваща или новоизградена LAN / WAN мрежа.
MAIN CHARACTERISTICS & TECHNICAL FEATURES
ОСНОВНИ ХАРАКТЕРИСТИКИ
– It connects to the existing Ethernet data network.
– Ethernet connection encrypted with the control software.
– Encrypted communication between the reading unit and the control unit through 485 bus.
– Automatic mode for input/output access (Antipassback).
– Configurable operation for torno.
– Configuration of the relays for individual outputs or for the control of a motor.
– Relay configuration in bistable mode or pulse mode.
– Configuration of the relay activation time in pulse mode.
– Configuration of the digital inputs for operation as trigger or switch.
– Possibility of configuration of delays for the activation of the outputs.
– Possibility of activating the outputs directly through the digital inputs.
– Possibility of assigning conditional logic for the activation of the outputs.
– SELV power supply (safety extra-low voltage).
Opening Modes
– Identification mode through associated biometric sensor.
– Access mode by time band.
– Access mode by group profiles.
– Remote opening
Information provided through control software
– Notification by type of fingerprint reading: Valid, invalid and out of schedule.
– Detailed reports of the activity.
– Maintenance reports.
– Automatic incident messages.
– History of identification events per user.
– Access permissions per groups of users (staff or clients).
– Elimination of access on request (fingerprint deletion locally).
– Staff access follow-up.
– Notification of status of inputs and outputs.
ТЕХНИЧЕСКИ ХАРАКТЕРИСТИКИ
Environmental characteristics
– Operating temperature: -10ºC to 45ºC.
– Storage temperature: -20ºC to 70ºC.
– Relative humidity: 20% to 80%.
Autonomy
– Necessary power supply: 12Vdc1A.
Interfaces
– Power supply jack connector.
– RJ45 connector for Ethernet.
– RS232 connector for configuration in local mode.
– 2 digital inputs Removable terminal type connectors.
– 4 relay output 12A 230V (NC and NA). Removable terminal type connectors.
– RJ45 connector for 485 bus connection of the biometric sensor 1.
– RJ45 connector for 485 bus connection of the biometric sensor 2.
Network and communications
– Communication with biometric reading units through 485 bus.
– Ethernet cabled communication.
– Possibility of ONLINE operation only
Installation
– For interiors.
– Surface.